HR1103S 3KVA
Technical Specs
INPUT
- Cold Start: YES, default frequency=50Hz or settable
- Acceptable Input Voltage:
- 110VAC~288VAC
- 100% load@>176VAC
- 80% load@>154VAC
- 70% load@>132VAC
- 50% load@>110VAC
Phase :Single phase in,single phase out
Transfer Voltage Range:
- (200VAC/208VAC/220VAC/230VAC/240VAC)
- -Line low transfer 110VAC
- -Line low recovery 121VAC
- -Line high transfer 288VAC
- -Line high recovery 281VAC
Input Current
- Rating(nominal input voltage) : 14.4A
- Input Power Factor ≥0.97
- Input Frequency Range 40~70Hz
OUTPUT
Frequency adaptable Settable
Power
- Power(kVA) max : 3
- Power(kW) max3 : 2.7(2.4 for 200VAC/208VAC)
Output Voltage
- Waveform(Bat. Mode) Pure Sine Wave
- Nominal voltage 200/208/220/230/240VAC
- Voltage regulation ± 1 %
- Transient response ≤5% (0% – 100% -0%)
- Transient recovery ≤30ms (0% – 100% -0%)
- Voltage distortion ≤2% THD, linear load
- ≤ 5% THD, non-linear load
Output Frequency
- Synchronization range ±5Hz default
- Battery mode (50±0.1) Hz default
- Transfer Time
- Line mode to battery mode 0
- Inverter to bypass 2ms
Efficiency
- Line mode with battery full charged : 88%@100% load, 90%@50% load
- ECO mode: 97.0%
- Battery mode: 87%@100% load, 89%@50% load
- Noise(1m away): <45dB@<60%load,60%load
- Overload Capability(Inverter) 105%~130%: Transfer to bypass after 1 mins.
- 150%: Transfer to bypass after 30s
- Overload Capability(Battery Mode) 105%~130%:shutdown after 10s
- 150%:shutdown after 5s
- Overload Capability (Bypass Mode) <130%: Long time
- >130%&<150%:Shutdown after 10min
- >150%&<180%:Shutdown after 5 seconds
- Crest Ratio 3:1
BATTERY
- Rating/Type: 12VDC/7Ah
- Quantity: 8
- DC Voltage: 96VDC
- Back-up Time: 5.5mins @80% load
- Battery-Low Voltage: 88VDC~94VDC depending on load
INDICATOR & ALARM
- Display: LED+LCD
- Alarm two short one long
- Fault Continuous beeping
INTERFACE
- Smart RS232 Standard Cable support INVT Power Monitor Software
- SNMP(option) Power Managment from SNMP Manager and Web Browser
OPTION
- Intelligent Kits DB9 port, dry contact
- USB B-type USB port
- SNMP Kits pluggable type
- Leakage current :<1mA
Charger
- Charging voltage : float:109VDC/boost:112VDC
- Charging current (max) : 1A
- Charging time : 8h recharge to 90%
